Part Number:
CA-BAG-ST
Description:
Saddle Bags
Fitment:
2013-2014 Can-Am Spyder ST, STS, ST Limited
Revision:
1
NOTE: We recommend the use of Loctite® or
similar thread lock product when assembling parts
on your motorcycle.
1. Remove stock carrier using the OEM triangular
head tool (Figure 1).
2. Remove stock seat or Corbin’s front and rear
seats.
3. Pull off center light cap (Figure 2).
4. If you haven’t done so already, remove the rear
hinge bracket, using a 13mm socket wrench
(Figure 3).
FIG 7
FIG 8
FIG 5
FIG 6
FIG 3
FIG 4
FIG 1
FIG 2
Tools Required
8mm Socket wrench
T27 Torx wrench
10mm Socket wrench
Flathead screwdriver
12mm Socket wrench
Phillips screwdriver
13mm Socket wrench
3mm Allen wrench
13mm Open wrench
Parts List
1 #A01203 Left front mounting bracket
1 #A01204 Right front mounting bracket
1 #A01205 Left back mounting bracket
1 #A01206 Right back mounting bracket
1 #A01024 Right bag upper support bracket
1 #A01027 Left bag upper support bracket
16 #SP00699 m8 flat washers
8 #SP00265 3/8” flat washers
4 #SP00147 Zinc flat washers
8 #SP0076 m8 nylon nuts
2 #SP00126 m6 nylon nuts
12 #SP00157 3/8” lock washers
4 #SP00198 3/8” x 16 chrome acorn nuts
2 #SP02049 m6 x 50 hex head bolts
2 #SP00761 m8 x 60 hex head bolts
4 #SP1004 m8 x 40 hex head bolts
4 #SP00271 8/32” cap screws
1 Right signal cover
1 Left signal cover
1 Turn signal wires
6 Zipties
