Questions? Give us a holler...
800-223-4332
tech
@
corbin.com
28. Install the right side bracket by securing the
bottom position with the provided hex head bolt
and flat washer. Secure the top position with the
provided stainless steel stud, using a 5/8”
open/combination wrench (Figure 30).
29. Install right turn signal on the the Corbin
bracket. Run the turn signal wires through the
side panel and into the housing. Secure housing,
connect the wires and reinstall the cover.
30. Reconnect the turn signals.
31. Reinstall right front panel.
32. Reinstall hinge bracket.
33. Reinstall the handrail and reconnect the tail
lights.
34. Install bags and secure the top and lower
front position with the provided washer and acorn
nuts. Secure the other two positions with the
provided hex head bolts and flat washers. (
Figure 31).
35. Relocate the antenna by securing it onto the
mud guard (Figure 32).
36. Reinstall mud guard.
FIG 25
FIG 27
FIG 29
FIG 26
FIG 28
FIG 30
FIG 30
FIG 31
