instructions for
Motorcycle chain breaker & riveter
model no:
vS779.v3
thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. Safety
WarninG!
ensure Health and safety, local authority and general workshop practice regulations are adhered to when using tools and
equipment.
8
Do not
use if damaged.
9
maintain in good and clean condition for best and safest performance.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
maintain correct balance and footing. ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and unauthorised persons away from the work area.
8
ensure that the motorcycle is safely positioned and secured.
2. introDuction
Breaks and rejoins most types of chain quickly and easily. suitable for most sizes of drive or cam chain from #35 to #630. supplied with a
range of pins, dies and detailed instructions.
3. Specification
model .................................................................... Vs779.V3.
contents.................................................... Pins: 2.2, 2.9, 3.8.
..................................Pin Guide: 2.2mm upper, 2.2mm lower.
...................................................................Anvil: 3mm, 6mm.
....................................................................................spring.
.......................................................................... Press Plates.
..................................................................................... lever.
...................................................................................Handle.
...........................................................................chain Press.
4. operation
Vs779.V3 | issue 1 07/02/17
Original Language Version
© Jack sealey limited
refer to
instructions
fig.1
Wear protective
gloves
Wear safety
footwear
