CLUTCH 7-7
• Install the push rod and push piece
5
.
• Apply engine oil to the release bearing
6
.
• Install the release bearing
6
and washer
7
.
• Fit the clutch pressure plate
8
.
C
Direction of outside
• Install the clutch springs and clutch spring set bolts
9
.
• Tighten the clutch spring set bolts
9
to the specified torque.
NOTE:
Tighten the clutch spring set bolts
9
diagonally.
Clutch spring set bolt: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
• Install the gasket
0
and clutch cover
A
.
• Tighten the clutch cover bolts (
A
,
B
) diagonally to the speci-
fied torque.
Clutch cover bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
A
Length:
60 mm (2.4 in)
B
Length:
25 mm (1.0 in)
• Install the brake pedal. (
17-20)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (
2-12)
• Clutch cable play (
2-20)
• Smooth operation of clutch system
Replace the gasket
0
with a new one.
