9-6 GEARSHIFTING
• Align the pin groove
A
with the pin
B
when installing the
stopper plate
7
.
• Apply a small quantity of THREAD LOCK to the gearshift cam
driven gear pin
8
and tighten it to the specified torque.
99000-32050: THREAD LOCK “1342” or equivalent
Gearshift cam driven
gear
pin:
24 N·m (2.4 kgf-m, 17.5 lbf-ft)
• Fit the springs
9
, pins
0
, pawls
A
and gearshift roller
B
to
the gearshift cam driven gear
C
.
NOTE:
Wider side
C
of pawl should be positioned outside.
• With the pawls held in pushed position, install the pawl lifter
D
.
