19-6 REAR SUSPENSION
BEARING REPLACEMENT
• Remove the spacers.
• Remove the needle roller bearings
1
. (26 pieces of needle
roller bearing)
• Remove the dust seals
2
.
• Remove the needle roller bearing cage
3
with the special
tool.
09921-20240: Bearing remover set (Remover 17 mm)
• Press the new needle roller bearing cage with the special tool
and a suitable size socket wrench.
NOTE:
When installing the needle roller bearing cage
3
, the stamped
mark on the bearing must face left side.
Position the needle roller bearing cage by referring to the illus-
tration of page 19-22.
09924-84521: Bearing installer set
• Press the new dust seals
4
with the special tool and a suit-
able size socket wrench.
NOTE:
When installing the dust seal
4
, the stamped mark
A
on the
dust seal
4
must face inside.
09924-84521: Bearing installer set
• Apply grease to the needle roller bearings and install them.
• Apply grease to the dust seals and spacers.
• Install the spacers
B
and
C
.
B
For right side
C
For left side
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
Replace the dust seal
4
with new ones.
