2-14 PERIODIC MAINTENANCE
ENGINE OIL FILTER CHANGE
• Drain the engine oil as described in the engine oil replace-
ment procedure.
• Remove the oil filter cap
2
by removing its bolts
1
.
• Remove the spring
3
with oil filter
4
.
• Apply engine oil lightly to the gasket of new oil filter
5
before
installation.
• Install the new oil filter
5
.
• Apply engine oil lightly to the new O-ring
6
.
• Install the oil filter cap and tighten the bolts.
Oil filter cap bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Add new engine oil and check the oil level as described in the
engine oil level inspection procedure.
Oil change.......... 850 ml (0.9/0.7 US/Imp qt)
Filter change...... 900 ml (1.0/0.8 US/Imp qt)
Overhaul............. 1 000 ml (1.1/0.9 US/Imp qt)
Make sure that the oil filter installed properly. If the fil-
ter is installed improperly, serious engine damage
may result.
Replace the O-ring with a new one.
