TRANSMISSION AND CRANKSHAFT 10-13
NOTE:
* Press the bearings (
1
,
3
,
6
) into the crankcase, so that the
stepped side
A
faces inside of the crankcase.
* Press the bearing
7
into the crankcase, so that the sealed
side
C
faces outside of the crankcase.
B
Inside of the crankcase
D
Outside of the crankcase
• Apply THREAD LOCK SUPER to the bearing retainer screws.
99000-32030: THREAD LOCK SUPER “1303”
or equivalent
• Tighten the bearing retainer screws to the specified torque.
Bearing retainer screw: 8.5 N·m (0.85 kgf-m, 6.0 lbf-ft)
CRANKCASE REED VALVE INSTALLATION
• Install the crankcase reed valve
1
and reed valve guide
2
direction as shown.
• Tighten the reed valve guide bolts
3
to the specified torque.
Reed valve guide bolt: 4.5 N·m (0.45 kgf-m, 3.0 lbf-ft)
A
Crankcase
CRANKSHAFT INSTALLATION
• Fit the crankshaft into the left crankcase with the special tools.
NOTE:
Use the attachment (inner driver attachment
3
) for crankshaft
bearing inside diameter.
09910-32812: Crankshaft installer
1
09911-11310: Crankshaft installer attachment C
2
09913-70210: Bearing installer set (10 – 75
)
(Inner driver attachment 30 mm
3
)
