11-8 LUBRICATION SYSTEM
• Apply engine oil to the oil pump No.2 shaft
1
, outer rotor
4
and inner rotor
3
.
• Install the oil pump No.2 shaft
1
and inner rotor
3
onto the
crankcase.
• Install the outer rotor
4
onto the crankcase.
• Install the oil strainer No.2
5
and tighten the oil strainer No.2
bolts
6
to the specified torque.
Oil strainer No.2 bolt: 5.5 N·m (0.55 kgf-m, 4.0 lbf-ft)
• Install the oil pump No.2 cover
7
and tighten the oil pump
No.2 bolts
8
to the specified torque.
Oil pump No.2 bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
• Install the magneto cover. (
15-19)
• Install the gearshift lever. (
9-7)
INSPECTION AFTER INSTALLATION
• Engine oil level and oil leakage (
2-12)
• Engine coolant level and coolant leakage (
2-18, -19)
• Oil pressure (
2-42)
Face the punch mark
B
on outer rotor
4
to the crank-
case.
