TRANSMISSION AND CRANKSHAFT 10-17
CRANKCASE INSTALLATION
• Fit the dowel pins
1
and gasket
2
.
• Fit the right crankcase on the left crankcase.
• Install the clamp
A
to the bolt.
• Tighten the crankcase bolts (
a
,
b
,
c
) to the specified
torque.
Crankcase bolt: 11 N·m (1.1 kgf-m, 8.0 lbf-ft)
NOTE:
If it is hard to tighten the bolts, separate the crankcase and con-
firm that the transmission parts are assembled correctly.
• Install the oil strainer (No.1) and oil strainer cap
3
. (
2-17)
a
Length: 40 mm (1.6 in)
b
Length: 50 mm (2.0 in)
c
Length: 70 mm (2.8 in)
• Inspect the crankshaft, countershaft and driveshaft for smooth
movement.
• Apply grease to the oil seal lip and O-rings
4
.
99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
• Fit the O-rings
4
and spacer
5
to the driveshaft.
Replace the gasket
2
with a new one.
Replace the O-rings
4
with new ones.
