CYLINDER HEAD, CYLINDER AND PISTON 6-29
CYLINDER HEAD
• Install the dowel pins
1
into the cylinder and then install the
cylinder head gasket
2
onto the cylinder.
• Place the cylinder head
3
on the cylinder.
• Apply engine oil to the washers and thread portion of the bolts
before installing the cylinder head bolts.
• With the cylinder head snugly seated on the cylinder, secure it
by tightening the cylinder head bolts
5
in diagonal stages.
• Tighten the cylinder head bolts
5
to the specified torque.
Cylinder head bolt: Initial 25 N·m (2.5 kgf-m, 18.0 lbf-ft)
Final 51 N·m (5.1 kgf-m, 37.0 lbf-ft)
• After tightening the cylinder head bolts to specification, tighten
the cylinder head base nuts
6
and cylinder base bolt
7
to the
specified torque.
Cylinder head base nut: 10 N·m (1.0 kgf-m, 7.0 lbf-ft)
Cylinder base bolt: 12 N·m (1.2 kgf-m, 8.5 lbf-ft)
• Install the engine mounting upper brackets. (
5-6)
• Connect the ECT sensor coupler.
• Connect the radiator hose. (
20-24)
• Install the exhaust pipe. (
5-9, -10)
• Install the throttle body. (
13-15)
• Install the TO sensor.
Replace the cylinder head gasket
2
with a new one.
Do not drop the cam chain
4
into the crankcase.
