Still RX60 35-50, Original Instructions Manual

Page: 319 / 596

Depressurising the hydraulic circuits for
the "5th hydraulic function"
If the truck has a "5th hydraulic function",
the hydraulic circuit of this function must al-
so be depressurised. The procedure is simi-
lar to the depressurisation of the hydraulic cir-
cuits for the basic functions and the additional
functions. In addition, the hydraulic circuit is
depressurised in the same way as the attach-
ments are operated. The hydraulic circuit for
the "5th hydraulic function" is actuated using
the function key for the "5th function" (2).
–
Actuate the function key for the "5th func-
tion" (2).
The LED for the "5th function" lights up.
–
Push the cross lever (1) once in the direc-
tion of the arrow until the end position is
reached.
The hydraulic circuit of the 5th hydraulic func-
tion is depressurised. The plug connectors on
the lift mast are depressurised.
–
Actuate the function key for the "5th func-
tion" (2).
The LED for the "5th function" goes out.
Completing the depressurisation
–
To complete the depressurisation, observe
the section entitled "Exiting the wizard".
Depressurising the hydraulic
system using a triple mini-lever
–
Start the "wizard for depressurising the hy-
draulic system".
1
2
6219_003-2 4 1

Operating
4
Depressurising the hydraulic system
303 56388011501 EN - 05/2022 - 08