Still RX60 35-50, Original Instructions Manual

Page: 227 / 596

Controlling the lifting system us-
ing a quadruple mini-lever
DANGER
Reaching into or climbing between moving parts
of the truck (e.g. lift mast, sideshifts, working equip-
ment, load carrying devices etc.) can lead to seri-
ous injury or death and is therefore prohibited.
–
Observe the safety regulations for handling loads.
–
Operate the lifting system from the driver's seat
only.
WARNING
Risk of accident as a result of an operating error!
These operating instructions describe how to operate
the lifting system in the factory configuration.
If the authorised service centre has configured a dif-
ferent configuration, the newly applied pictograms
must be observed to ensure safe operation. The
operating company must make all drivers aware of
the fact that a different configuration has been con-
figured.
–
Observe the pictograms on the operating levers.
–
Before use, check that the hydraulic functions are
working correctly.
The lifting and lowering movements of the lift
mast are controlled using the "lift-lower" oper-
ating lever (3). The adhesive label bearing the
corresponding pictograms (1) is affixed at the
designated point (6).
The tilting movement of the lift mast is con-
trolled using the "tilting" operating lever (4).
The adhesive label bearing the corresponding
pictograms (2) is affixed at the designated
point (5).
The pictograms are arranged according to the
directions of movement of the operating lev-
er (3) or (4).
Lifting/lowering the fork carriage
To lift the fork carriage:
–
Move the "lifting/lowering" operating lev-
er (3) in the direction of the arrow (B).
To lower the fork carriage:
D C
B
A

Operating
4
Lifting
211 56388011501 EN - 05/2022 - 08