Still RX60 35-50, Original Instructions Manual

Page: 368 / 596

The sensor is adjusted using DIP switches (6).
–
To access the DIP switches, open the cover
on the underside of the sensor housing with
the key (5).
During this process, the two tabs of the key (5)
fit into the recesses of the cover.
–
Using the DIP switches "1 to 5" (6), adjust
the range and the sensitivity of the sensor.
The DIP switches can be adjusted using a
small screwdriver.
CAUTION
The settings for DIP switches "6 to 8" are the factory
settings of the manufacturer.
Do not change the factory settings of the manufac-
turer!
Factory settings of the manufacturer
DIP switch
6 7 8
1 1 0
The possible settings for DIP switches "1 to 5"
are shown in the following tables:
DIP switch
1 2 3 Range
0 0 0 2 m
0 0 1 3 m
0 1 0 4 m
0 1 1 6 m
1 0 0 8 m
1 0 1 12 m
1 1 0 16 m
1 1 1 24 m
4 5 Sensitivity
0 0 Very high
0 1 High
1 0 Medium
1 1 Low
1 2 3 4 5 6 7 8
6
DIP-Schalter_V2

Operating
4
Auxiliary equipment
352 56388011501 EN - 05/2022 - 08