Still RX60 35-50, Original Instructions Manual

Page: 202 / 596

–
Press the push button (1) several times in
succession so that the push button is actu-
ated for a total of five seconds.
The parking brake is applied with an audi-
ble sound. After the push button is released,
the parking brake should not make any fur-
ther sounds; if a sound is heard, this means
the push button was pressed for less than
five seconds. In this case, press the push but-
ton again to apply the parking brake again.
Repeat this process as necessary until the
parking brake applies and the symbol ap-
pears.
Actuating a parking brake with a malfunction
when the truck is in motion
–
Press the push button (1).
The parking brake is applied.
NOTE
The truck brakes more strongly if the push
button (1) is pressed and held down for longer
or pressed several times.
"Safe parking" function
This function monitors the braking effect after
the truck is parked. If a sensor is fitted on the
lift mast (variant), it also checks whether the
fork carriage is lowered.
This function alerts the driver with an audible
warning signal if:
●
The driver leaves the driver's seat and it
has not been possible to apply the parking
brake
●
The driver leaves the driver's seat without
lowering the fork carriage (variant)
●
The driver attempts to switch off the truck
and it has not been possible to apply the
parking brake
●
The truck starts moving within the next 20
seconds after the parking brake is applied
Operating
4
Driving
186 56388011501 EN - 05/2022 - 08