Still RX60 35-50, Original Instructions Manual

Page: 315 / 596

The following message appears:
Disen-
gage all hydraulic axles, then
switch off the truck
–
Depressurise the hydraulics, see the rele-
vant section for the respective operating de-
vices.
WARNING
The movements of the load lift system present a risk
of crushing!
During the depressurisation process, the fork car-
riage or the lift mast can move slightly.
–
Do not reach into or stand below the components
of the load lift system.
NOTE
Do not move the steering wheel while de-
pressurising the hydraulics. Otherwise the hy-
draulic system will build up pressure again. As
soon as pressure has built up in the hydraulic
system again, the function for relieving the hy-
draulics becomes inactive.
Depressurising the hydraulic
system using multi-lever opera-
tion
–
Start the "wizard for depressurising the hy-
draulic system".
Depressurising the hydraulic circuits for
the basic functions
The basic functions include the first four hy-
draulic functions. The basic functions are con-
trolled via the first two hydraulic circuits.
The basic functions are:
●
Lifting the fork carriage
●
Lowering the fork carriage
●
Tilting the lift mast forwards
●
Tilting the lift mast backwards
–
Push the operating levers (1, 2) once in the
direction of the arrow until the end position
is reached.

6219_003-251
1
2

Operating
4
Depressurising the hydraulic system
299 56388011501 EN - 05/2022 - 08