Still RX60 35-50, Original Instructions Manual

Page: 179 / 596

NOTE
If sprint mode is used, the truck's energy con-
sumption is higher. The battery is therefore
discharged more quickly. The drive units heat
up more quickly.
Switching sprint mode on and off
–
To switch on sprint mode, push the associ-
ated softkey.
The "sprint mode" symbol (2) appears on
the display of the display-operating unit. Sprint
mode is switched on.
–
To switch off the mode, push the softkey
again.
The symbol disappears and the mode is
switched off. The truck is then back in
STILL Classic mode.
Automatic switch off for sprint mode
If the truck is operated in sprint mode at the
maximum performance level, the truck will
consume more energy. As a result, the battery
is discharged faster and the traction drives
and energy supply may become too hot.
The battery voltage and the temperature of the
traction drives and energy supply are moni-
tored continuously. If under voltage (does not
apply to lithium-ion batteries) or overheating
occurs, sprint mode is automatically deactiva-
ted.
If the truck is automatically switched off due to
under voltage, sprint mode can then only be
switched on again if the following conditions
are met:
●
The battery is fully recharged.
●
The truck has been restarted.
If the truck is automatically switched off due
to overtemperature, sprint mode can then only
be switched on again when the drive units
have cooled down.
Operating
4
Efficiency and drive modes
163 56388011501 EN - 05/2022 - 08