Still RX60 35-50, Original Instructions Manual

Page: 426 / 596

NOTE
If the parking brake is released via the emer-
gency actuation mechanism, it is possible to
drive the truck at a low speed.
●
The truck can be moved out of the hazard-
ous situation or to the repair location.
●
Driving with a faulty parking brake requires
the driver to be especially vigilant.
–
Lift the cover (1) and fold it up.
Release parking brake
CAUTION
Risk of damage to components.
If the emergency actuation mechanism (2) will not
move, the brake pedal has not been depressed far
enough. Pulling too hard can damage the emergency
actuation mechanism.
–
Depress the brake pedal further.
–
Pull the emergency actuation mechanism (2) with
a maximum of 50 N.
–
To release the mechanism, fully depress
the brake pedal and hold it down.
–
Remove and hold on to the emergency ac-
tuation mechanism (2).
–
Release the brake pedal. Let go of the
emergency actuation mechanism (2).
Once two grooves are visible (see arrow), the
parking brake is released.
Apply parking brake
–
Fully depress the brake pedal.
The emergency actuation mechanism (2) re-
turns to its initial position.
–
Release the brake pedal.
Once only one groove is visible (see arrow),
the parking brake is applied.
–
If the status of the parking brake cannot be
reliably determined from the position of the
emergency actuation mechanism, secure
the truck with wedges.
6301_003-002_V2

Operating
4
Procedure in emergencies
410 56388011501 EN - 05/2022 - 08