Still RX60 35-50, Original Instructions Manual

Page: 405 / 596

The tow coupling is opened.
–
Slowly drive the truck forwards until the tow-
ing eye and towing jaws are disconnected.
–
Close the tow coupling by actuating the
closing lever (1).
NOTE
To protect the lower coupling pin bush against
contamination, always keep the tow coupling
closed.
Coupling model RO*245
NOTE
Tow coupling RO 245 is intended for a tow-
ing eye in accordance with DIN 74054 (bore
diameter 40 mm) or DIN 8454 (bore diameter
35 mm).
–
Take measures to prevent the trailer from
rolling away, e.g. using wedges.
–
Adjust the towing eye of the tiller so that it is
in the middle of the towing jaws.
–
Push the hand lever (5) upwards.
–
The tow coupling is opened.
DANGER
People can become trapped between the truck and
trailer!
When coupling, ensure that there are no persons
present between the truck and the trailer.
–
Slowly move the truck backwards.
DANGER
Risk of accident due to open coupling pin!
A protruding safety handle means that the tow bar
eye has not been coupled correctly. The trailer must
not be towed in this condition.
–
Make sure that the control pin does not protrude
from the control bush.
–
Repeat the coupling process if necessary.
–
Remove any items used to prevent the trail-
er from rolling away.
7321_003-066_V2
5
7
6

Operating
4
Trailer operation
389 56388011501 EN - 05/2022 - 08