Still RX60 35-50, Original Instructions Manual

Page: 442 / 596

DANGER
Risk of explosion due to static charge!
If the driver is electrostatically charg-
ed, touching the battery may produce
sparks. These sparks can ignite oxyhy-
drogen gas that has formed.
–
To dissipate a possible electrostatic
charge, touch an earthed component
that is situated a long way from the
battery.
DANGER
Risk of fire due to overheated connec-
tion assemblies!
Plugs that are not fully plugged in can
produce excessive heat. They pose a
fire hazard.
–
Always fully plug the mains plug and
the truck plug for the charging cable
into the relevant socket.
DANGER
Risk of fire due to overheated connec-
tion assembly!
Do not pull out the mains plug under
load as this will result in excessive wear
and pose a fire hazard.
–
If the mains plug needs be pulled
out before the end of the charging
process, cancel the charging process
manually first (see the section entitled
"Stopping the charging process man-
ually")
DANGER
Risk of explosion due to spark dis-
charge!
If the mains plug is plugged in, sparks
may occur. These sparks can ignite any
oxyhydrogen gas present in the battery
compartment.
–
Do not plug in the mains plug unless
the battery compartment of the truck
and the charging area have been suf-
ficiently ventilated.
Operating
4
On-board charger
426 56388011501 EN - 05/2022 - 08