–
Plug the truck plug (3) of the charging cable
into the charger socket (1) on the truck.
–
Make sure that the interlock (4) has closed
correctly.
After a self-test, the battery charger auto-
matically begins the charging process. The
LED (5) pulses in yellow.
At the same time, the charging state dis-
play (6) appears on the display-operating unit.
If the charging state display (6) does not ap-
pear or the LED (5) lights up permanently in
red, there is a fault. It is possible that the
charger socket (1) does not recognise the
truck plug (3).
–
In this case, pull out the truck plug (3) and
plug it in again.
If the charging process is running, the charg-
ing state display (6) is animated in green.
If the charging process is not running, the
charging state display (6) flashes in grey.
3
4
1
5
6301_003-040
7,3
kW
10:48
88 %
6301_003-133
6
Operating
4
On-board charger
429
56388011501 EN - 05/2022 - 08
Summary of Contents for RX60 35-50
