Still RX60 35-50, Original Instructions Manual

Page: 184 / 596

contour and be damaged or torn off. Examples
of these components are:
●
An unfolded roof panel in the driver's cab
●
Open cab doors
Condition of the roadways
Roadways must be sufficiently firm, level and
free from contamination and fallen objects.
Drainage channels, level crossings and similar
obstacles must be evened out and, if necessa-
ry, ramps must be provided so that trucks can
drive over these obstacles with as few bumps
as possible.
Note the load capacity of manhole covers,
drain covers etc.
There must be sufficient distance between the
highest points of the truck or the load and the
fixed elements of the surrounding area. The
height is based on the overall height of the lift
mast and the dimensions of the load.
Rules for roadways and the working
area
It is only permitted to drive on routes author-
ised for traffic by the operating company or
its representatives. Traffic routes must be free
from obstacles. The load must only be set
down and stored in the designated locations.
The operating company and its representa-
tives must ensure that unauthorised third par-
ties do not enter the working area.
NOTE
Please observe the definition of the following
responsible person: "operating company".
Hazardous areas
Hazardous areas on roadways must be indica-
ted by standard traffic signs or, if necessary,
by additional warning signs.
Operating
4
Driving
168 56388011501 EN - 05/2022 - 08