Still RX60 35-50, Original Instructions Manual

Page: 431 / 596

–
Do not place any metal objects on the bat-
tery.
–
Fully open any protective structures (e.g.
fabric-covered cab).
–
Have fire extinguishing equipment ready.
DANGER
Risk of fire due to overheated connec-
tion assemblies!
Plugs that are not fully plugged in can
produce excessive heat. They pose a
fire hazard.
–
Always fully plug the mains plug and
the truck plug for the charging cable
into the relevant socket.
DANGER
Risk of fire due to overheated connec-
tion assembly!
Do not pull out the mains plug under
load as this will result in excessive wear
and pose a fire hazard.
–
If the mains plug needs be pulled
out before the end of the charging
process, cancel the charging process
at the battery charger first.
DANGER
Risk of explosion from connecting and
disconnecting connection assemblies!
Even when the truck and the battery
charger are switched off, oxyhydrogen
gas in the vicinity can explode if connec-
tion assemblies are connected or dis-
connected.
–
Ventilate the charging area sufficient-
ly.
CAUTION
Possible component damage.
Make sure that the charging cable does not cross
any traffic routes. Do not route the charging cable
over sharp edges.
Operating
4
Charging quick-access
415 56388011501 EN - 05/2022 - 08