Still RX60 35-50, Original Instructions Manual

Page: 290 / 596

Function checking of the auto-
matic mast vertical positioning
function (variant)
CAUTION
Risk of damage to property due to the lift mast collid-
ing with racks or other objects!
–
Before using the "automatic mast vertical position-
ing" assistance system, position the truck at a suf-
ficient distance from racks and other objects.
–
To check the function of the automatic mast
vertical positioning function, proceed as fol-
lows:
–
Press the softkey.
The symbol appears in the display.
–
Tilt back the lift mast until it reaches the end
stop.
–
Tilt the lift mast forwards.
The lift mast must stop in the vertical position.
The automatic mast vertical positioning can be
used.
–
If the lift mast does not stop in the vertical
position, do not use the assistance system.
–
In this case, contact your authorised service
centre.
Calibrating the automatic mast
vertical positioning
The automatic mast vertical positioning is cali-
brated using a wizard on the display-operating
unit.
NOTE
The wizard requires access authorisation for
the fleet manager. Access to the settings
menu is only available if the truck is at a
standstill and the parking brake is applied. If
the parking brake is released prematurely, the
settings menu will close.
–
Set the load down, if necessary.
Operating
4
Tilt angle-dependent assistance systems
274 56388011501 EN - 05/2022 - 08