Still RX60 35-50, Original Instructions Manual

Page: 492 / 596

Replacing the battery using a
change frame (variant)
WARNING
Risk of accident!
The load capacity of the truck or lift truck in use
must at least match the weight of the battery and the
weight of the change frame.
–
Observe the nameplates of the battery and of the
change frame.
CAUTION
Risk of damage!
Place the battery change frame along with the bat-
tery only on a firm surface with sufficient load-bear-
ing capacity.
Do not place the battery change frame with the bat-
tery on a soft surface or in a rack.
The battery change frame (variant) features
an advantageous design that allows a truck or
pallet stacker to pick up the battery quickly.
The battery remains on the change frame for
charging and storage. The change frame fits
between the battery holding fixtures in the bat-
tery compartment of the truck. Once the bat-
tery has been set down on its holding fixtures,
the change frame is moved back out of the
truck.
Removing the battery
–
Park the truck securely.
–
Open the battery door.
CAUTION
Risk of component damage!
If you disconnect the battery male connector while
the key switch is switched on (under load), an arc
will be produced. This can lead to erosion at the
contacts, which considerably shortens the service life
of the contacts.
–
Switch off the key switch before disconnecting the
battery male connector.
Operating
4
Replacing and transporting the battery
476 56388011501 EN - 05/2022 - 08