Still RX60 35-50, Original Instructions Manual

Page: 418 / 596

Code Shown on display Cause/action
Enable sprint mode
If the battery is charged after locking sprint
mode or a normal temperature is reached, this
message appears. Sprint mode can be used
again once the truck has been restarted.
Sprint mode blocked —
battery
If the battery experiences under-voltage or too
high a temperature, this message appears.
Sprint mode is no longer available.
- Observe the previous message.
Sprint mode blocked —
temperature
If the temperature at the drive units is too high,
this message appears. Sprint mode is no longer
available.
- Observe the previous message.
Dead man switch
If the truck is equipped with a foot switch, and a
truck function is called up when the foot switch
is not actuated, this message appears.
- Actuate the foot switch.
Overload
With the "overload protection" variant, this mes-
sage appears if an excessive load is picked up.
- Set down the load.
Overtemp.: Drive unit
The drive units are protected against overtem-
perature. If the temperature at the drive units is
too high, this message appears.
Acceleration and maximum speed are reduced.
- Allow the truck to cool down.
Overtemperature: bat-
tery
If the truck control unit detects an excessive
battery temperature, this message appears.
- Allow the truck to cool down.
Working mode active
This message is not displayed during normal
operation.
- Contact the authorised service centre.
Access expired
If the truck is equipped with this variant, this
message might appear.
- See the associated instructions.
Access denied
Access expires in
< 1 month
Access expires in
< 1 day
If the truck is equipped with this variant, this
message might appear.
- See the associated instructions.
Access expires in
< 1 week
Access expires in
< 2 days
Access expires in
< 3 days
Operating
4
Display messages
402 56388011501 EN - 05/2022 - 08