Still RX60 35-50, Original Instructions Manual

Page: 102 / 596

For assistance when climbing into and out of
the truck, use the handles (2) and (4) for sup-
port. The overhead guard post (1) can also be
used for support.
Always climb into the truck facing forward:
–
If the truck has a driver's cab, open the driv-
er's door.
–
Grip the handle (2) with your left hand and
do not let go.
–
Grip the handle (4) with your right hand and
do not let go.
–
Place your right foot on the bottom step (5).
–
Place your left foot on the top step (6).
–
Place your right foot in the footwell (7).
–
Enter the truck and sit down on the driver's
seat (3).
–
Close the driver's door where relevant.
Always climb out of the truck backwards:
–
If the truck has a driver's cab, open the driv-
er's door.
–
Grip the handle (2) with your left hand and
do not let go.
–
Stand up from the driver's seat and place
your left foot on the top step (6).
–
Grip the handle (4) with your right hand and
do not let go.
–
Place your right foot on the bottom step (5).
–
Place your left foot on the ground and climb
down from the truck.
Adjusting the driver's seat and
armrest
Adjusting the driver's seat and armrest is one
of the checks and tasks that must be per-
formed before daily use. The truck can only
be operated safely when the seat position is
correct.
–
Refer to the following chapter entitled "Driv-
er's seat".

Operating
4
Checks and tasks before daily use
86 56388011501 EN - 05/2022 - 08