Still RX60 35-50, Original Instructions Manual

Page: 479 / 596

To read the battery charge status, see the
section entitled "Checking the battery charge
status".
–
Park the truck securely.
–
Open the battery door completely.
–
Disconnect the battery male connector.
–
Keep away from naked flames. Do not
smoke.
–
Check the battery cables for damage.
If necessary, have the battery cables re-
placed by the authorised service centre.
DANGER
There is a risk of damage, short circuiting and ex-
plosions!
–
Do not place any metal objects or tools on the
battery.
–
Keep away from naked flames.
–
Do not smoke.
–
Connect the battery male connector to the
plug on the battery charger.
–
Start the battery charger.
The charging process starts automatically.
The display signals the charging process by
illuminating the LEDS as a chase light.
The battery charger will indicate when the bat-
tery is fully charged. Only disconnect the bat-
tery from the charger if no current is flowing.
The battery has no memory effect. Therefore,
it can be charged in any charge state without
the capacity of the battery being impaired.
At ambient temperatures below 0°C, the
charging process will take much longer.
NOTE
Observe the information in the operating in-
structions for the battery and the battery
charger.
Operating
4
Handling the lithium-ion battery
463 56388011501 EN - 05/2022 - 08