Still RX60 35-50, Original Instructions Manual

Page: 412 / 596

Code Shown on display Cause/action
Check the battery
This message about the on-board charger is
triggered by different causes:
A possible fault in the electrical connection be-
tween the battery and the on-board charger.
The fuse for the on-board charger on the truck
or the on-board charger is defective.
The battery has a fault.
The battery has exceeded its service life.
The battery is incorrectly configured.
- Contact the authorised service centre.
V6962
Check battery type
This message about the on-board charger is
triggered by different causes:
The battery is defective.
The wrong battery is connected.
- Contact the authorised service centre.
Check battery acid lev-
el
The acid level of the lead-acid battery is too low.
- Check the acid level of the battery. Correct if
necessary.
V6965
Battery temperature
high
The charging process has been automatically
terminated due to the battery temperature be-
ing too high. This message about the on-board
charger is triggered by different causes:
The truck was heavily used before charging and
the battery has become very hot.
The ambient temperature is too high and the
battery cannot cool down.
The charging profile is configured incorrectly.
- Allow the battery to cool down.
- Allow the battery temperature symbol on
the display-operating unit to flash. Change the
"Start" symbol to "Pause".
Check battery door sen-
sor
The battery door sensor does not detect that the
battery door is closed.
- Make sure that the lock on the battery door is
engaged.
- If the message continues to appear, please
contact the authorised service centre.
Close the battery door
The battery door is open. The truck will not
move.
- Close the battery door.
Battery too cold
The lithium-ion battery is too cold.
- Move the truck to a warmer environment.
Release brake pedal
The desired action is only possible after releas-
ing the brake pedal.
- Release the brake pedal.
Operating
4
Display messages
396 56388011501 EN - 05/2022 - 08