Still RX60 35-50, Original Instructions Manual

Page: 203 / 596

Activation and intervention by the "Safe parking" function
Cause Effect
The driver's seat is vacated. The electric park-
ing brake cannot be applied or previously could
not be applied.
The following message appears in the display:
Parking brake cannot be applied.
- To confirm, press the softkey.
A warning signal sounds when the driver's seat
is vacated. Sitting in the driver's seat silences
the warning signal again.
The truck must be switched off. The electric
parking brake cannot be applied or previously
could not be applied.
The truck cannot be switched off. A warning
signal sounds.
The following messages appear in the display:
Parking brake cannot be ap-
plied.
- To confirm, press the softkey.
Switch off truck anyway?
- To confirm, press the softkey.
Secure truck against rolling
away.
- Secure the truck with wedges so that the truck
does not roll away.
- To confirm, press the softkey.
It is now possible to switch off the truck.
DANGER
Risk of fatal injury from being run over if the truck
rolls away!
Park the truck securely if the parking brake is faulty.
Secure the industrial truck to prevent it from rolling
away.
–
To do this, strictly adhere to the following instruc-
tions:
–
If the parking brake cannot be applied auto-
matically or via the push button, perform an
emergency actuation of the parking brake.
Refer to the section entitled "Emergency ac-
tuation of the parking brake" in the chapter
"Procedure in emergencies".
–
If the parking brake cannot be applied via
the emergency actuation mechanism, se-
cure the truck with wedges to prevent it
from rolling.
–
Have the parking brake repaired by an au-
thorised service centre.
Operating
4
Driving
187 56388011501 EN - 05/2022 - 08