Still RX60 35-50, Original Instructions Manual

Page: 494 / 596

–
Position the change frame (3) under the
battery (2) so that the centre of the bat-
tery (1) is in line with the recess (4) in the
change frame.
This alignment ensures that the battery is
positioned centrally on the change frame. The
battery must be positioned centrally on the
change frame in order for the change frame to
be moved into the truck and to reduce the risk
of the battery tipping over when being moved.
If multiple batteries are used, it is advisable to
permanently mark the centre of the battery (1)
(e.g. using a strip of adhesive tape).
CAUTION
Risk of component damage!
–
Move the change frame under the battery only up
to the edge of the stop.
–
Carefully move the change frame under the
battery.
–
Carefully lift the battery up and out of the
truck. Pay attention to the distance to the
chassis.
–
Slowly remove the battery from the battery
compartment.
Transporting and setting down the bat-
tery
WARNING
Risk of crushing or shearing!
The battery must be transported very carefully, i.e.
at a low speed, using slow steering movements and
careful braking.
–
Do not use the methods described here to trans-
port the battery over long distances.

Operating
4
Replacing and transporting the battery
478 56388011501 EN - 05/2022 - 08