Still RX60 35-50, Original Instructions Manual

Page: 383 / 596

Precautionary measures
–
There must be no persons stood on the
racking levels onto which the laser beam is
projected.
–
If it is possible to see through the rack on-
to racks situated behind the relevant rack,
people must not stand on the racking lev-
els opposite the rack on which the laser is
working.
–
If a risk to people cannot be ruled out, the
driver must switch off the laser immediately.
Tasks to be performed before starting
work
To ensure that the system operates accurate-
ly, the lift mast must be vertical and the lens of
the laser must be clean and free of ice.
●
Check that the assistance system is func-
tioning correctly before starting work.
●
Check that the lens of the laser is uncov-
ered, clean and undamaged. If necessary,
clean the lens, see the chapter entitled
"Cleaning".
Using Laser-Smartfork
CAUTION
Risk of damage due to miscalculation of the lift
height
The Laser-Smartfork is an assistance system that
helps the driver to place loads into stock and remove
loads from stock at significant lift heights. The driver
must be aware of the limits of the system. He must
not rely exclusively on the assistance system.
CAUTION
Risk of damage to components!
The Laser-Smartfork only shows the correct height
for placing loads into stock when the lift mast is verti-
cal.
–
Position the lift mast vertically before placing
loads into stock or removing loads from stock.

Operating
4
Optical assistance systems
367 56388011501 EN - 05/2022 - 08