Still RX60 35-50, Original Instructions Manual

Page: 476 / 596

Checking the battery charge
state
The charge state of the lithium-ion battery can
be read on the display-operating unit of the
truck and on the lithium-ion battery display.
Reading on the display-operating unit
–
Apply the parking brake.
–
Switch on the key switch.
–
Read the charge state from the display.
–
Charge a discharged or partly discharged
battery.
Meaning of the colours in the display
1
Green:
The charge state is > 10%.
The battery is sufficiently charged
2 Yellow:
The charge state is ≤ 10%.
Charge the battery soon.
3 Red:
Stop working. Charge the battery imme-
diately. The battery is at risk of deep dis-
charge.
Reading from the battery indicator
The battery indicator is located on the side
of the battery tray. Like the display-operating
unit, the battery indicator shows the charge
state of the lithium-ion battery. Warnings are
issued only on this battery indicator.
–
If you have any questions, contact your au-
thorised service centre.
Charge state LEDs
When the battery is connected to the truck
and the truck is switched on, the charge state
LEDs (3) display the charge state in 10% in-
crements. The charge state LEDs can light up
green and red.
●
A charge state of 0% to 20% is indicated by
a red bar.
If this bar flashes, the charge state is < 2%.

6209_003-002
1
2
3
Service LED (red)
Temperature LED (yellow/red)
Charge state LEDs (red/green)
1
2
3

Operating
4
Handling the lithium-ion battery
460 56388011501 EN - 05/2022 - 08