Still RX60 35-50, Original Instructions Manual

Page: 136 / 596

Functions of the control and enter keys
Designation Position Functions
Softkeys 4, 10
The softkeys correspond to the adjacent functions or input
options.
If functions have been stored in the favourites bars (1, 3),
these functions can be switched on and off by pressing the
adjacent softkey.
In addition to switching functions on and off, the soft keys
on the right (3) navigate through the menu structure. These
soft keys are also used to select actions.
Menu button 5
The menu button opens the first level of the menu.
If a deeper navigation level is currently selected, this button
takes you back to the first menu level.
When using the settings menus, the menu button saves
input.
Scrolling buttons 6
The scrolling buttons allow you to scroll up and
down menu items within a menu level.
This button clears input entered in the settings menus.
This button switches between upper case and lower
case for alphanumeric entries.
Back button 7
When the back button is pressed, the display switches
to the next menu level up.
This button cancels input entered in the settings menus.
Main display button 8
Pressing the main display button at any menu level
takes you directly back to the main display.
Access authorisation with PIN
code (variant)
Trucks equipped with the "Access authorisa-
tion with PIN code" variant are protected
against unauthorised use by a PIN code. So
that the same truck can be used by different
drivers, individual PIN codes can be specified.
An initial PIN code of "11111" is preset at the
factory for the first use.
NOTE
We recommend that the fleet manager
changes this PIN code using their access au-
thorisation. See also the section entitled "Ac-
cess authorisation for the fleet manager (var-
iant)".
Operating
4
Display-operating unit
120 56388011501 EN - 05/2022 - 08