Still RX60 35-50, Original Instructions Manual

Page: 174 / 596

The warning zone light projects a light bar
next to the truck on both the left-hand side and
right-hand side of the truck or even behind
the truck. This light bar indicates the danger
areas to the sides or rear of the truck while
in operation. See the section entitled "Danger
area" in the chapter entitled "Handling loads".
The warning zone light plus projects a semi-
circle around the truck. This light bar indicates
the danger areas to the sides and rear of
the truck while in operation. See the section
entitled "Danger area" in the chapter entitled
"Handling loads".
The warning zone light (plus) switches on and
off again together with the truck.
If the truck has StVZO (German Road Traffic
Licensing Regulations) equipment, the warn-
ing zone light (plus) can be switched on and
off via the display-operating unit.
–
To do so, press the softkey.
NOTE
If the truck is to be operated on public roads,
the warning zone light must be switched off.
–
Before using the truck, make sure that the
warning zone light is working and has been
adjusted correctly.
The distance from the light bar to the truck
must be between 70...75 cm.
–
To adjust the warning zone light, see the
section entitled "Adjusting the warning zone
light" in the chapter entitled "Preserving op-
erational readiness".
When ordering the truck, you can choose be-
tween a blue or red warning zone light (plus).
6219_003-231

5510_003-047

Operating
4
Lighting
158 56388011501 EN - 05/2022 - 08