Still RX60 35-50, Original Instructions Manual

Page: 264 / 596

Driving onto lifts
The driver may only use this truck on lifts with
a sufficient load capacity and for which the
operating company has been granted authori-
sation (refer to the section entitled "Definition
of responsible persons").
DANGER
There is a risk of fatal injury from being crushed or
run over by the truck.
–
There must not be any persons already in the lift
when the truck is driven into the lift.
–
Persons are only permitted to enter the lift once
the truck is secure, and must exit the lift before
the truck is driven out.
Determining the total actual weight
–
Park the truck securely and switch it off.
–
Determine the unit weights by reading
the truck nameplate and, if necessary,
the nameplate on the attachment (variant)
and/or by weighing the load to be lifted.
–
Add together the determined individual
weights to obtain the total weight of the
truck:
Net weight (1)
+ Max. permissible battery weight (2)
+ Ballast weight (variant) (3)
+ Net weight of attachment (variant)
+ Weight of the load to be lifted
+ 100 kg allowance for driver
= Total actual weight
–
Drive the truck into the lift with the forks
facing forwards. Make sure not to touch the
shaft walls.
–
Park the truck securely in the lift and switch
it off to prevent uncontrolled movements of
the load or the truck.

5510_003-033

Operating
4
Handling loads
248 56388011501 EN - 05/2022 - 08