Still RX60 35-50, Original Instructions Manual

Page: 218 / 596

Lifting
Lifting system variants
The movement of the fork carriage and the lift
mast heavily depends on the following equip-
ment:
●
The lift mast with which the truck is equip-
ped, see
⇒
Chapter "Lift mast versions",
Page 202
●
The operating device with which the
hydraulic functions are controlled, see
⇒
Chapter "Operating devices for the lifting
system", Page 203
Regardless of the equipment variants of the
truck, the basic specifications and procedures
must be complied with, see
⇒
Chapter "Safety
regulations when handing loads", Page 227 .
Lift mast versions
DANGER
Risk of accident if the lift mast or the load collides
with low ceilings or entrances.
–
Note that the inner lift mast or load may be higher
than the fork carriage.
–
Observe the heights of ceilings and entrances.
One of the following lift masts may be attach-
ed to the truck:
Telescopic lift mast
When lifting, the lift mast rises above the out-
er lift cylinders. The lift mast takes the fork
carriage with it via the chains. In this scenario,
the fork carriage rises at twice the speed of
the inner lift mast. The top edge (1) of the
inner lift mast can therefore be higher than the
fork carriage.
1

Operating
4
Lifting
202 56388011501 EN - 05/2022 - 08