Still RX60 35-50, Original Instructions Manual

Page: 259 / 596

WARNING
Risk of accident due to unintentional switch-off of the
intermediate lift cut-out.
If the truck is also equipped with the "intermediate lift
cut-out" variant and the shake function is performed
close to an intermediate lift cut-out lift limit, this may
inadvertently cancel the lift limit.
This can happen if the operating device has to be
moved twice in order to cancel the lift limit. If the op-
erating device for the shake function is then repeat-
edly actuated, this can cancel the lift limit. The fork
carriage then moves beyond the lift limit during the
shaking process. This can cause the fork carriage to
collide with higher objects.
–
Do not perform the shake function close to the lift
height of a lift limit.
–
Cancel the lift limit by pressing the "F button". See
the note below.
NOTE
The lift limit can be cancelled by pressing the
"F button". See also the section entitled "Inter-
mediate lift cut-out (variant)". For this option,
contact the authorised service centre.
The following section shows how the shake
function is activated via the standard assign-
ment for "lifting/lowering" using the different
variants of the operating devices. If the "lift-
ing/lowering" function is assigned differently
on the operating device, the shake function is
activated via this other assignment.
Joystick 4Plus:
–
Move the Joystick 4Plus (1) back and forth
between positions (A) and (B) four times.
Then continue to move the component in
the same way.
6210_003-089
1
A
B

Operating
4
Handling loads
243 56388011501 EN - 05/2022 - 08