Still RX60 35-50, Original Instructions Manual

Page: 551 / 596

ENVIRONMENT NOTE
Carefully collect any spilt hydraulic oil. Dis-
pose of this hydraulic oil in accordance with
environmental regulations.
The marks (1), (2) and (3) indicate the mini-
mum filling levels for the different lift mast ver-
sions.
NOTE
The optimum hydraulic oil level is between the
marks (3) and (max) for all lift mast versions.
Assignment of the lift mast version to the mark on the dipstick and the oil filling quantity
Marking
Overall height [mm]
Oil filling
quantity [l]
Telescopic lift mast Triple mast
3.5 t LSP 600 4.5 t & 5.0 t
3.5 t
LSP 600 &
4.0 t
4.5 t & 5.0 t
1 ≤ 3250 ≤ 2850 ≤ 2350 - 42
2 -
3050
to
3250
2500
to
3000
≤ 2600 50
3 - - 3200
2800
to
3200
58
CAUTION
Risk of damage.
If the hydraulic oil level is too low, the steering is
restricted and the pump may be damaged.
–
If the oil level is too low, do not use the truck and
contact the authorised service centre.
–
Screw in the breather filter and the dipstick
in a clockwise direction.
–
Close the bottom plate again.
–
Position the floor mat.
–
Connect the battery male connector.
NOTE
The authorised service centre performs the fill-
ing and topping-up procedures.
6219_003-280
1 2 3 max

Maintenance
5
Preserving operational readiness
535 56388011501 EN - 05/2022 - 08