Still RX60 35-50, Original Instructions Manual

Page: 96 / 596

Checks and tasks before daily use
Visual inspections and function checking
WARNING
Risk of injury from falling off the truck!
When climbing onto the truck, there is
a risk of getting stuck or slipping and
falling. Use suitable equipment to reach
higher points on the truck.
–
Use only the steps provided for this
purpose to climb onto the truck.
–
Use equipment such as stepladders
or platforms to reach inaccessible
areas.
Damage to the truck or the attachment (var-
iant), non-functional switches or safety sys-
tems and modification of predefined set values
can lead to unpredictable and dangerous sit-
uations. To ensure that the truck can be oper-
ated safely, the visual inspections and function
checking must be carried out before daily use.
The components that must be checked and
the aspects of these components that require
checking are listed in the following table. If
damage or other defects are identified on the
truck or the attachment (variant) during the
following inspections, the truck must not be
used until it has been properly repaired. Dam-
age or other defects must be reported to the
supervisor or the responsible fleet manager
immediately so that repairs by the authorised
service centre can be arranged.
Ensure that the truck is safe for operation each day before it is used:
Component Course of action
Fork arms, general lifting accessories
Perform a visual inspection to check for deformation
and wear (e.g. to check if they are bent, broken or
feature significant wear).
Check the condition and function of the safety devi-
ces (1) to prevent lifting and shifting.
Roller tracks (2) Make sure that there is a film of grease.
Load chains
Perform a visual inspection to ensure that the
chains are intact and have adequate and even ten-
sion.
Fork arms and roller tracks

Operating
4
Checks and tasks before daily use
80 56388011501 EN - 05/2022 - 08