Still RX60 35-50, Original Instructions Manual

Page: 276 / 596

–
To deactivate the
intermediate lift
cut-out 1
, press the
Intermediate
lift cut-out 1
softkey.
–
Press the scroll button .
The
intermediate lift cut-out 1
is deactivated. The orange activation bar goes
out.
Lift transition damping
This assistance system, in conjunction with
the optical lift height measuring system, en-
sures that the lifting speed and lowering speed
are adjusted at the lift mast transition points.
As a result, the inner lift masts move in and
out of the outer lift mast smoothly and with-
out jolting. The lifting and lowering procedures
are damped on telescopic lift masts and triple
masts. This protects the load against jerking
movements.
Lift mast end-stop damping (var-
iant)
This assistance system, in conjunction with
the optical height measuring system, ensures
that the fork carriage reaches the lifting stops
gently. This prevents the lifting movement
from stopping abruptly.
If the truck is equipped with the "automatic
mast vertical positioning" variant, the tilt stops
will also be approached gently. This is done
by the "tilt end stop damping" assistance sys-
tem. This increases the comfort for the driver.
Fleet manager
Enter desired height
= Clear
Intermediate
lift cut-out 1
6,892
= Deactivate
= Save = Cancel
6219_003-317_en
m

Operating
4
Lift height-dependent assistance systems
260 56388011501 EN - 05/2022 - 08