Still RX60 35-50, Original Instructions Manual

Page: 581 / 596

Information about the lead-acid battery
CAUTION
The battery weight and the battery dimensions affect
the stability of the truck.
When replacing the battery, the weight ratios must
not be changed. The battery weight must remain
within the weight range specified on the nameplate.
The location of ballast weights must not be changed.
The bottom of the battery tray must be closed.
–
Use batteries that meet DIN standards.
–
Do not change the position of ballast weights.
–
Check the battery weight against the information
on the nameplate.
–
Only use a battery tray that is closed at the bot-
tom.
NOTE
Battery specifications according to DIN 43536;
cells in accordance with DIN EN 60254-2, 80-
V circuit A
–
The battery weight can be found on the
nameplate of the battery.
Lead-acid batteries
Battery designa-
tion
Capacity
[Ah]
Tray Weight/
ballast
weight [kg]
Battery compartment di-
mensions [mm]
Circuit
Length Width Height
5PzS 700 700
235 234 1028 855 784
A
5PzS 775 775
5PzV 600 600
5PzV 700 700
5TCSM 840 840
6PzS 840 840
236 - 1028 999 784
6PzS 930 930
6PzV 720 720
6PzV 840 840
4TCSM 990 990
NOTE
To convert to TENSOR
®
batteries, contact the
authorised service centre.
Technical data
6
Information about the lead-acid battery
565 56388011501 EN - 05/2022 - 08