Still RX60 35-50, Original Instructions Manual

Page: 239 / 596

–
Insert the securing bolt fully into the fork
extension.
–
Insert the linch pin into the securing bolt
and secure.
Operation with reversible fork
arms (variant)
DANGER
Risk of fatal injury from falling load!
Normal fork arms are not structurally designed for
reverse operation. Failure to observe this instruction
can lead to material failure and ultimately to the load
falling.
–
Only work in reverse operation using reversible
fork arms (1).
WARNING
Risk of accident from slipping load!
Loads may slip on the reversible fork arms if there is
no load support. A fork extension (variant) cannot be
secured against slipping.
–
Do not use a fork extension (variant).
WARNING
Risk of accident from the truck tipping over.
When driving, the centre of gravity of the load (2)
must not be more than 600 mm above the ground.
The truck may tip forwards when driving or braking.
–
Only drive with a load centre of gravity up to a
max. of 600 mm above the ground
NOTE
If the truck is equipped with the "load meas-
urement" assistance system (variant), the
"tare" function must always be run after the
fork arms have been changed. Otherwise, cor-
rect load measurement cannot be guaranteed.

Operating
4
Lifting
223 56388011501 EN - 05/2022 - 08