Still RX60 35-50, Original Instructions Manual

Page: 528 / 596

Maintenance - 1000 hours/annually
At operating hours
1000 2000 4000 5000 7000
8000 10000 11000 13000 14000
Carried
out
 
Chassis, bodywork and fittings
Check the chassis for cracks.
Check the overhead guard, plus the cab and glass panes where relevant, for dam-
age.
Variant: Check that the cab door sensor is working correctly and check for damage.
Check the controls, switches and joints for damage, and apply grease and oil.
Check that the driver's seat is working correctly and check for damage.
Check that the driver restraint system is working correctly and check for damage,
and clean.
Check the signal horn.
Variant: Check the dual-pedal variant for damage and that it is working correctly,
and lubricate. Perform calibration.
Battery compartment
Check that the battery door and the sensor are working correctly and check for
damage.
Check the battery lock for damage.
Variant: Check the oil level of the hydraulic battery carrier and check for leak
tightness. Check all moving parts for wear and lubricate them.
Tyres and wheels
Check tyres for wear and check the air pressure if necessary.
Check the wheels for damage and check the tightening torques.
Drive axle
Check the mounting of the drive axle and check the drive axle for leak tightness.
Check that the conductor rails between the power modules and the motor connec-
tions are mounted correctly.
Check the oil level in the drive wheel units.
Change the gearbox oil in the drive wheel units (once after the first 1000 hours).
Steering systems
Check the steering system for leaks and check that it is working correctly.
Check that the steering wheel is securely attached and check the rotary handle for
damage.
Maintenance
5
General maintenance information
512 56388011501 EN - 05/2022 - 08