Still RX60 35-50, Original Instructions Manual

Page: 482 / 596

Replacing and transporting the battery
General information on replacing
the battery
CAUTION
Risk of components being damaged by the lifting
accessory and battery rolling away!
The lifting accessory and battery may roll away in
an uncontrolled manner if the battery is not removed
on a level, smooth floor with sufficient load-bearing
capacity.
–
Follow the operating instructions for the lifting ac-
cessories used.
–
Always remove the battery on a level, smooth
floor with sufficient load capacity.
Batteries can be removed with a truck and
with a battery change frame.
The load capacity of the lifting accessory used
must at least match the battery weight (see
the battery nameplate).
Wire cross-section of the battery
cable on the "High Performance"
variant
If the truck is fitted with the "High Perform-
ance" variant, the components have a higher
current draw.
CAUTION
Risk of overheating of the battery cable.
Due to the higher current draw, the wire cross-sec-
tion of the battery cable must be at least 70 mm
2
.
–
Ensure that all batteries in use have a battery
cable with a wire cross-section of at least 70 mm
2
.
NOTE
If different batteries are used in alternating
battery operation, always ensure that all bat-
teries used have a battery cable with a wire
cross-section of at least 70 mm
2
.
Operating
4
Replacing and transporting the battery
466 56388011501 EN - 05/2022 - 08