Still RX60 35-50, Original Instructions Manual

Page: 59 / 596

Exercise caution when handling
gas springs and accumulators
WARNING
Gas springs are under high pressure. Improper re-
moval results in an elevated risk of injury.
For ease of operation, various functions on the truck
can be supported by gas springs. Gas springs are
complex components that are subject to high inter-
nal pressures (up to 300 bar). They may under no
circumstances be opened unless instructed to do
so, and may be installed only when not under pres-
sure. If required, the authorised service centre will
depressurise the gas spring in accordance with the
regulations before removal. Gas springs must be
depressurised before recycling.
–
Avoid damage, lateral forces, buckling, tempera-
tures over 80°C and heavy contamination.
–
Damaged or defective gas springs must be
changed immediately.
–
Contact the authorised service centre.
WARNING
Accumulators are under high pressure. Improper in-
stallation of an accumulator results in an elevated
risk of injury.
Before starting work on the accumulator it must be
depressurised.
–
Contact the authorised service centre.
Length of the fork arms
DANGER
Risk of accident due to the incorrect selection of
fork arms!
–
The fork arms must match the depth of the load.
If the fork arms are too short, the load may fall
off the arms after it has been picked up. In ad-
dition, be aware that the load centre of gravity
may shift as a result of dynamic forces, such
as braking. A load that is otherwise resting
safely on the fork arms may move forwards
and fall.
If the fork arms are too long, they can catch
on loading units behind the load that is to be
picked up. These other loading units then fall
over when the load is raised.
Safety
2
Basic principles for safe operation
43 56388011501 EN - 05/2022 - 08