Still RX60 35-50, Original Instructions Manual

Page: 454 / 596

Disconnect the battery male
connector
–
Open the battery door.
CAUTION
Risk of component damage!
If you disconnect the battery male connector while
the key switch is switched on (under load), an arc
will be produced. This can lead to erosion at the
contacts, which considerably shortens the service life
of the contacts.
–
Do not disconnect the battery male connector with
the key switch switched on.
–
Make sure that the key switch is switched off be-
fore disconnecting the battery male connector.
–
Press the orange latch (3).
The battery male connector (2) unlocks.
–
Pull out the battery male connector (2) from
the plug connection (1) on the truck and set
it down safely.
CAUTION
There is a risk of short circuit if the ca-
bles are damaged.
Do not crush the battery cable when
closing the battery door.
–
Ensure that the battery cable does
not come into contact with the battery
door.
NOTE
The appearance of a lithium-ion battery differs
from this illustration. The battery male connec-
tor also features additional contacts for com-
munication between the battery and the truck
control unit. However, the disconnection pro-
cedure is the same.
–
Close the battery door.
3
Illustration of a lead-acid battery

Operating
4
Connecting and disconnecting the battery male connector
438 56388011501 EN - 05/2022 - 08