Still RX60 35-50, Original Instructions Manual

Page: 480 / 596

The battery door can be locked in the open
position using a support bracket.
–
Pull the support bracket (1) upwards. Re-
move the support bracket from its support
mounting (2) on the battery door.
–
Swivel the support bracket (1) outwards in a
clockwise direction.
–
Clip the support bracket (1) into the support
eyelet (3) on the truck.
The battery door will lock into a slightly open
position.
–
To close the battery door, swing the sup-
port bracket (1) back into position. Lock the
support bracket (1) into the support mount-
ing (2) on the battery door.
After charging
The battery charger will switch off automatical-
ly.
–
Open the battery door. Lock the battery
door in the open position.
–
Disconnect the battery male connector from
the plug for the battery charger.
–
Insert the battery male connector fully into
the plug connection on the truck.
CAUTION
There is a risk of short circuit if the ca-
bles are damaged.
Do not crush the charging cable when
closing the battery cover.
–
Make sure that the charging cable
does not come into contact with the
battery cover.
3
1
2
6301_003-012

Operating
4
Handling the lithium-ion battery
464 56388011501 EN - 05/2022 - 08