Still RX60 35-50, Original Instructions Manual

Page: 258 / 596

Operation
To activate the shake function:
–
Move the corresponding operating device
for the "Lifting" function over the zero posi-
tion four times in quick succession.
The fork carriage moves as normal. The
shake function is active after the fourth time
the operating device is moved.
–
Continue to move the operating device back
and forth.
The fork carriage moves up and down more
quickly and more jerkily.
The intensity of the shaking is controlled via
the vigour with which the operating device is
moved. The more vigorously and frequently
the operating device is moved, the more in-
tense the shaking is.
NOTE
Once the function has been activated, the
driver has two seconds to start the shaking. If
two seconds elapse without the shake function
being used, the shake function is deactivated
again.
WARNING
The shake function remains active for two seconds
following activation.
If the driver simply wants to lift or lower the load
during this time, note that the fork carriage may
move significantly more jerkily with the load than in
normal operation. If the two seconds elapse without
the shake function being used, the fork carriage can
be moved normally again with the load.
Operating
4
Handling loads
242 56388011501 EN - 05/2022 - 08