Still RX60 35-50, Original Instructions Manual

Page: 246 / 596

Example of reading the capacity rating plate:
The position numbers in the adjacent graphic
correspond to the position numbers on the ba-
sic capacity rating plate.
1
Distance between the load centre of
gravity and the fork back: 600 mm
2 Permissible lift height: 5880 mm
3 Weight of load to be lifted: 1000 kg
The distance between the load centre of grav-
ity and the fork back is 600 mm (1). The lift
height should be 5880 mm (2).
This means that the load must not exceed
1000 kg (3) (load capacity).
By implication, this means that, in this exam-
ple with the distance between the load centre
of gravity and the fork back being 600 mm,
a 1000-kg load must not be lifted higher than
5880 mm.
The load capacity specified for certain nominal
lifts applies up to this nominal lift. If the lift
value of the first line is exceeded, the load
capacity from the second line applies up to the
lift of the second line.
Residual load capacity rating plate for
built-in devices and attachments
NOTE
The residual load capacity rating plate for at-
tachments is read according to the same dia-
gram as in the example for the basic capacity
rating plate.
Some attachments have a standard sideshift
or a large sideshift. As a rule, the standard
sideshift is ±100 mm and the large sideshift is
230 mm.
In contrast to the large sideshift, the standard
sideshift offers a higher load capacity, but on-
ly within the scope of the specified standard
sideshift.
1000 kg
5880 mm
600 mm
1
2
3

Operating
4
Handling loads
230 56388011501 EN - 05/2022 - 08